Ezyliner FR – A Category 3 Fire Rated Liners
EZYLINER FR is a sold Plastic Co-Polymer Wall Lining renowned for its extreme toughness and durability and is Fire Rated in accordance with ISO5660 and AS5637.1 . Ezyliner FR is approved as a Category 3 Fire Rated wall and ceiling liner. It’s easy to clean, does not absorb water, and by following the instructions, easy to install.
Farmers find Ezyliner FR is ideal for milk rooms, vat stands, bail wall and wet wall areas. Easily cleaned, Ezyliner FR stays looking attractive despite occasional rough treatment. Ezyliner FR takes the knocks and bangs that could crack and shatter other linings.
No longer confined to the cutting rooms out the back – butchers can now use Ezyliner FR to line retail areas because it stays looking smooth and clean. Just throw warm water over it and scrub it with a Ministry of Agriculture and Fisheries approved cleaning agent, and it will clean up looking like new.
Fish processors, initially used Ezyliner FR to reline entire fish chillers because it did not become brittle and crack with the constant changes in temperature. However, due to its Fire Rated properties, Ezyliner FR is now being used throughout the entire plant.
Plants processing beef, mutton pork and lamb use Ezyliner FR extensively on both the walls and the ceilings. Health Inspectors find no problems once they see Ezyliner FR has been used as they know it can take the knocks, handles repeated washing, and it was put up by our own staff. Council inspectors also appreciate the use of a Fire Rated material being used as a wall liner.
Due to its flame resistant properties and weldability, Ezyliner FR is perfect for the production of Fume Cupboards. The requirements for Fire Rated materials in commercial buildings is becoming specified more and more so Ezyliner FR is perfect for the job.
MANY SOLID REASONS TO SPECIFY EZYLINER.
Suitable areas of use include – amenities blocks, bakeries, butcher shops, cold stores, fellmongers, Fume cupboards, bacon curing, food processing and packaging, commercial kitchens, pharmaceutical manufacturers, veterinary surgeries, cowsheds etc. Ezyliner FR should not be used for areas outside the temperature constraints of the product.
Ezyliner FR is impermeable, non-porous and does not encourage bacterial growth. It is easy to clean and will withstand repeated washing with a steam hose.
The materials used to produce Ezyliner FR are completely nontoxic and will not taint food or beverages. The material has FDA, DGA Food Approval.
The unique formulation of Ezyliner FR provides an extremely hardwearing surface which will not deteriorate, chip or flake, even from impact at low temperatures. Ezyliner FR has a durable life of at least 15 years when installed in an interior application as per the Ezyliner FR installation brochure. Most installations incorporating Ezyliner FR would fall inside the BIA 15 year durability provision, being systems having a moderate ease of access, but difficult to replace.
Ezyliner FR has a 1.8 x 10 4 co-efficient of linear expansion. This means that, for every 100C rise or fall in temperature, it will expand or contract by approximately 1.8mm per metre. Ezyliner fasteners and joiners are designed to accommodate this thermal movement.
NOTE: Care must be taken when installing Ezyliner FR at a temperature other than its working temperature.
Ezyliner FR has a working temperature of –100C to 500C with a vicat softening point of between 1400C and 1500C. Ezyliner FR may be steam cleaned.
Ezyliner is designed for interior use, however it has been formulated to withstand minimum UV radiation and may be used where subject to UV exposure. Prolonged exposure to UV will, however, result in a reduction in the life of the product..
Ezyliner FR is manufactured in a standard colour of white. Other colours may be available subject to minimum quantities. Ezyliner FR is manufactured in 3mm, 4.5mm and 6.0mm thickness, in standard 2400 x 1200mm sheets. Other sizes may be available, again subject to minimum quantities. The Ezyliner jointer is manufactured in a standard length of 2400 +5mm.
Ezyliner FR should always be stored away from direct sunlight on a flat surface and never on its edge. Lift rather than drag sheets off the stack to avoid damage to the quality surface. The Ezyliner jointer should be stored free of distortion at normal room temperature.